<![CDATA[Echo Show 8]]>Hi,
Is support for the Show 8 (8.0 inches (203 mm), 1280 x 800 resolution) planned?
Sincerely Robert

]]>https://forum.monoclecam.com/topic/347/echo-show-8RSS for NodeSat, 05 Sep 2026 04:49:26 GMTTue, 26 Nov 2019 02:19:39 GMT60<![CDATA[Reply to Echo Show 8 on Sat, 21 Dec 2019 20:21:33 GMT]]>@fusswolf Still cant get it working :-( I tried installing the gateway on another machine and get the same issue.

]]>https://forum.monoclecam.com/post/1773https://forum.monoclecam.com/post/1773Sat, 21 Dec 2019 20:21:33 GMT<![CDATA[Reply to Echo Show 8 on Fri, 20 Dec 2019 18:41:11 GMT]]>Thanks, that is most helpful! I will give it a try and see what happens. Although I dont think the Show 8 and the gateway are even connecting properly.

]]>https://forum.monoclecam.com/post/1767https://forum.monoclecam.com/post/1767Fri, 20 Dec 2019 18:41:11 GMT<![CDATA[Reply to Echo Show 8 on Fri, 20 Dec 2019 09:12:10 GMT]]>Hi iihammo,
maybe the older ip adress is still listed in my router or somewhere in the Nas, i don´t know.
I took a new one and it works.

gateway.JPG

My settings in monocle:

reolink.JPG
and
hikvisionsettings.JPG
The settings in the Cameramenue:
hikvisionCAMsettingsMain.JPG
hikvisionCAMsettingsSUB.JPG

]]>https://forum.monoclecam.com/post/1763https://forum.monoclecam.com/post/1763Fri, 20 Dec 2019 09:12:10 GMT<![CDATA[Reply to Echo Show 8 on Fri, 20 Dec 2019 02:02:45 GMT]]>@fusswolf what gateway settings and camera settings on both the camera and monocle entry did you use for the hikvision camera?

I just cant get it working…

Also, any idea why the new IP helped?

]]>https://forum.monoclecam.com/post/1762https://forum.monoclecam.com/post/1762Fri, 20 Dec 2019 02:02:45 GMT<![CDATA[Reply to Echo Show 8 on Thu, 19 Dec 2019 01:15:31 GMT]]>Hello everybody,
I was able to solve the problem, actually there were two of them :)
I rebuilt Docker on the NAS and gave the program a brand new, never used IP (problem 1 solved).
My HikVision Cam then worked with a new user (admin rights).
The Reolink Camera also got a new user with admin rights. I then entered the substream with 640x480 instead of the main stream and it worked. (Problem2 solved).
Thank you for the numerous suggestions, tips from you.
Thanks also to Google Translator (i left school in 1979 and my english is rusty :)
Best regards
Robert

]]>https://forum.monoclecam.com/post/1750https://forum.monoclecam.com/post/1750Thu, 19 Dec 2019 01:15:31 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 20:34:04 GMT]]>Hi,
the user / password change did not change anything.

]]>https://forum.monoclecam.com/post/1748https://forum.monoclecam.com/post/1748Wed, 18 Dec 2019 20:34:04 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 20:25:22 GMT]]>Thx Lockzie,

i´ll give it a chance :)

]]>https://forum.monoclecam.com/post/1747https://forum.monoclecam.com/post/1747Wed, 18 Dec 2019 20:25:22 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 20:23:20 GMT]]>My hikvision ip cam works with the show 8.
What I did was add a user in the camera settings called monoclecam and then used a password with no symbols, just upper/lower case and numbers.
That user/password then I use in my monocle portal settings

I don’t use my admin / password which I use to log in to the camera for the monocle portal

It’s worth a try…

]]>https://forum.monoclecam.com/post/1746https://forum.monoclecam.com/post/1746Wed, 18 Dec 2019 20:23:20 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 19:57:24 GMT]]>Hello Robert,
there is nothing in the Logfile of the Gateway after the TAGS .

Alexa speaks the message that the camera is not responding.
It happens with a HikVision and also with the Reolink Camera.
The Ports 554,443 are open in the firewall of the NAS and the router.
RTSP works fine with VLC Player.

Regards Robert

]]>https://forum.monoclecam.com/post/1745https://forum.monoclecam.com/post/1745Wed, 18 Dec 2019 19:57:24 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 17:54:50 GMT]]>@fusswolf

Are you getting any additional log data after the “INITIALIZE RTSP STREAM” section after asking Alexa to show the camera stream? We would expect to see a lot more data after that where the RTSP stream begins negotiating between the camera and Alexa device via the gateway.

Thanks, Robert

]]>https://forum.monoclecam.com/post/1743https://forum.monoclecam.com/post/1743Wed, 18 Dec 2019 17:54:50 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 11:05:45 GMT]]>Good Morning,
I managed to install the gateway on my Synology (thanks for the good instructions).
My IP address of the Nas is 194.168.1.112, the gateway is 192.168.1.1. As a subnet, I took 192.168.1.0/24.
Everything works according to the protocol

monocle_gateway_syno.JPG

I integrated my Reolink RLC-423 as follows:haus.JPG

It doesn’t work :( Whether I use Basic or Digest for authentication. Also different resolutions don’t help.
gateway_haus.JPG

cam_haus.JPG

I’m running out of ideas

Best regards
Robert

]]>https://forum.monoclecam.com/post/1742https://forum.monoclecam.com/post/1742Wed, 18 Dec 2019 11:05:45 GMT<![CDATA[Reply to Echo Show 8 on Wed, 18 Dec 2019 18:31:47 GMT]]>@Jouster-74 Can you say which cameras you have working with the Show 8?

]]>https://forum.monoclecam.com/post/1692https://forum.monoclecam.com/post/1692Wed, 18 Dec 2019 18:31:47 GMT<![CDATA[Reply to Echo Show 8 on Thu, 28 Nov 2019 23:05:50 GMT]]>@fusswolf

I did get the new 8” model in last week. I have not fully tested it yet but it seems to be working on some cursory tests/views of my cameras here. I suspect that like the Echo Show 5 it may require using the Monocle Gateway and may be limited to 1080P resolutions and lower. I hope to conduct more testing next week and update the site with this new model and it’s support and limitations a if any.

Thanks, Robert

]]>https://forum.monoclecam.com/post/1513https://forum.monoclecam.com/post/1513Thu, 28 Nov 2019 23:05:50 GMT<![CDATA[Reply to Echo Show 8 on Wed, 27 Nov 2019 22:42:30 GMT]]>Not sure if this answers your question fully but I can confirm I can view my full HD 1080p feeds directly on my Show 8 and Show 5 without I’ve got the gateway working. They both show fine and look great

]]>https://forum.monoclecam.com/post/1459https://forum.monoclecam.com/post/1459Wed, 27 Nov 2019 22:42:30 GMT