<![CDATA[Problem with Synology NAS, Reolink C1-Pro and Echo Show 8]]>Hi All,

I recently purchased Relink C1-Pro and I’m trying to get it working with my Echo Show 8.

I started off by installing monocle-gateway in docker on my NAS following the tutorial on the site (docker-compose version), this installed ok without any issues.

Next I added my camera to the Monocle Portal, here is a screenshot of my config in the portal:
Screenshot 2019-12-06 at 00.21.30.png

Alexa just keeps telling me the camera is unavailable, I’ve included a copy of my log below so hopefully someone can help me figure out my issue.

https://pastebin.com/umtAfbZT

I also tried to ping *.mproxy.io and it correctly connected to monocle-gateway (192.168.0.245)

I also tried the following tags without any success:

  • @tunnel, @noaudio
  • @proxy, @noaudio
  • @proxy-tcp, @noaudio

Thanks,
Vel

]]>https://forum.monoclecam.com/topic/387/problem-with-synology-nas-reolink-c1-pro-and-echo-show-8RSS for NodeMon, 13 Apr 2026 11:25:43 GMTFri, 06 Dec 2019 00:29:23 GMT60<![CDATA[Reply to Problem with Synology NAS, Reolink C1-Pro and Echo Show 8 on Fri, 28 Feb 2020 21:52:53 GMT]]>@Auspician , @Velocity

I believe the Echo Show 8 is limited to 1080P streams. Try the low resolution stream (secondary stream) from the ReoLink:

rtsp://192.168.0.24:554/h264Preview_01_sub

Thanks, Robert

]]>https://forum.monoclecam.com/post/2516https://forum.monoclecam.com/post/2516Fri, 28 Feb 2020 21:52:53 GMT<![CDATA[Reply to Problem with Synology NAS, Reolink C1-Pro and Echo Show 8 on Tue, 25 Feb 2020 08:09:52 GMT]]>Did you ever get this working? I’m running into the same issue with the same setup (Reolink cameras connecting to Surveillance Station through Docker–> Monocle Gateway). Any insight you could provide would be very helpful!

]]>https://forum.monoclecam.com/post/2479https://forum.monoclecam.com/post/2479Tue, 25 Feb 2020 08:09:52 GMT