Add Motion JPEG Video (MJPG) [ANSWERED]

Monocle

So I typically answer this question about MJPEG support with a NO because I’ve not come across a camera that supports MJPEG streams over RTSP and thus have never been able to test and verify it. All IP cameras that I have seen that support MJPEG only support it via HTTP/HTTPS streaming. So the easy answer is NO, but I’m sure there is some older camera out there that may support MJPEG over RTSP … maybe some high end Axis camera :-)

Spongemak

@Monocle it should be possible to use HTTP and stream to RTSP, I tried to do it via VLC but you don’t support MJPEG Codec.

Monocle

@Spongemak

I don’t believe that Amazon/Alexa will support HTTP/S streaming. They only document support for RTSP and WebRTC.

I agree with you that Amazon should support HTTP/S MJPEG streaming, but last time I tested it, Alexa refused to stream it.

The Monocle gateway and servers do not touch the audio and video data, we do not re-encode or transcode anything as that would add too much latency.

PS: VLC will render HTTP/S streams because VLC supports HTTP streaming.

Thanks, Robert

Spongemak

@Monocle I’m using raspberry to stream my camera via RTSP buy it won’t work becase the lack of MJPEG Codec

raspivid -n - | cvlc -vvv http://192.168.68.152:8080/?action=stream:chroma=mjpg:width=640:height=480 --sout ‘#rtp{sdp=rtsp://raspberrypi.local:8554/}’

I have a RTSP stream with MJPEG but won’t work in echo, I dont know if it has something to do with your codec support or alexa.

Monocle

@Spongemak

Ok, tomorrow I’ll try to add the MJPEG option in the Web UI and you can test it. Apart from adding it to the camera configuration there is not much else we can do on our end. Alexa is a black box with respect to accepting and playing streams.

Thanks, Robert

Spongemak

@Monocle Thanks! I let you know if it works, Regards.

Monocle

@Spongemak

I’ll post here once I get it in place. Thanks, Robert

G3ZDM

Will be interested to see if this works or not.

Monocle

@Spongemak

The MJPEG option is now available. After updating your camera feed and making the Alexa request, make sure to check your camera feed history in the Monocle web portals and make sure “MJPEG” is listed in the request data for the “videoCodec”:

Example:

    "timestamp": "2020-06-05T19:21:24.826Z",
    "request": "InitializeCameraStreams",
    "response": [
      {
        "uri": "...",
        "proxy": "...",
        "resolution": {
          "width": "320",
          "height": "240"
        },
        "authorizationType": "DIGEST",
------> "videoCodec": "MJPEG",
        "audioCodec": "NONE",
        "protocol": "RTSP"
      }
    ]
  },

Thanks, Robert

Spongemak

@Monocle I couldn’t get it to work, I think they better try converting the stream to H264, thanks a lot for the help anyway. regards.

SchmuFoo

Hello Robert @Monocle

is MJPG still possible? Tried to add my Loxone Intercom but cant see the MJPG Option:

Cheers,
Jan