Ubiquiti 2688x1512 and Alexa
-
I have Ubiquiti camera hooked up to Alexa and just upgrade a camera to the new UVC4-BulletBeta camera that is able to do 2688x1512 stream. When I set it to that, Alexa will try to open it but it times out. If I change the stream to the 720P and change the setting to match it work. Anyone successfully able to get the hidef stream?
-
I have all my unifi cameras working with 1080p streams.
But I do not have the g4 and g4 bullet.
Gr,
-
Which Alexa device are you using?
-
I use 3 echo show 8 devices.
It is working like a charm in 1080p and monoclecam Gateway. But with a delay of 6 sec. -
I have an echo 8 and multiple firestick and firesticks 4k. Yea when you have the G4 Bullet the options for streams are 480, 720 and 2k streams.
-
And also with a delay of 6sec? I want to test the 4g bullet. What was the price you paid for it ?
-
The Echo Show 5 and 8 are limited to 1080P streams. However the FireTV 4K should display the 2K feed.
If its not, you can try adding the tag@fake-fmtpand see if that makes any difference.The larger Echo Shows do render 2K and 4K camera streams.
Thanks, Robert
-
@apassias
Yea the delay is understandable since it needs to route through the VPN. -
@apassias
and the camera was like $190 from the early access store. If you have G3 bullets the night IR brightness is way better on the G4 by 100% -
@LosBoricua I also have the UVC-G4-Bullet, and it works fine with Monocle/Gateway depending on the Echo device’s capability. I have tested it with two models:
-
Fire TV Stick 4K running FireOS v6.2.6.8 and FireTV Home v6200198.1, linked to an Echo Plus - Works
-
Echo Spot running FW v649600321 - Does NOT work
-
