echo show not working with cameras
-
I was following this thread since several days, suffering exactly the same problem from one day to another, touching 1000 of things, and finally I’ve managed to solve this, restoring to “factory defaults” my Echo Show 8.
For some reason before restoring it, the Echo won’t connect through IP/UDP with my Monocle Gateway and once restored everything started working.
I hope this can be useful your someone.
Cheers,
Ramiro. -
@sabueso
thank you for sharing with us.
You are right, Echo Show reset and new setup in Alexa app solved the problem for now.Best
Toto -
@sabueso Tried a factory reset echo show 10 2nd generation. I am NOT using the gateway. Did not work for me Graham
-
@sabueso I just signed up to thank you! It worked like a charm. I was facing the same issue for the last days and it started to make me crazy.
-
I tried the Reset with my Echo Spot - but still not workin´ :-(
-
@MikeUlm
works for me with Echo 5,Echo 8 and Echo 10 after
Factory reset.Best
Toto -
Thank you, after a leftover my show 5 goes again.
-
Works also for me on my Echo Show8 after factory reset, at least for now . Thanks for sharig the solution.
-
WTF - one day solution - today same behavior as before.
-
@Toto you’re right, I’m in the same page, now nothing works again :(
-
@flynmoose said in echo show not working with cameras:
I gave up. Not to disparage our host but this isn’t the first round of “working / not working.”
I ended up setting up Scrypted in a docker container on a Proxmox VM and it was VERY straightforward and worked within minutes. I’m sure there are downsides there but the WAF (wife acceptance factor) of “just make it work” won out over loyalty.
Can you show some more light on how you set this up? do you still need to use monocle?
-
@Toto Same here. Worked only for a couple of hours. I haven’t checked, but apparently factory reset restores the original firmware which works with Monocle and then the device updates to the new one which doesn’t work
-
@themlruts - no you don’t use Monocle at all.
I probably shouldn’t have even brought it up here since it is sort of a competing product.
-
I’m experiencing the same problems as everyone else. “cameras not responding”. Only temporary fix is to factory reset the echos, but hours or days later it happens again. After not seeing any response from @Monocle, I tested Scrypted. It works and doesn’t appear to have the 4 second lag that Monocle had. The only issues I have with Scrypted is that the camera only runs for a few hours before the echo goes back to the home screen. Have you, or anyone else, ran into this and know of a work around?
I’m using Unifi cameras with Echo as a baby monitor. Worked great with Monocle until recently. I’d like to use Scrypted, but the feed shuts down after a few hours for whatever reason and I haven’t been able to figure out why.
-
-
-
Hey Robert, your attention is really appreciated, but a short reply for our echo problem is welcome, even when a fix will need some time. Best Toto
-
@themlruts Did you have to purchase a license for Scrypted??? We also use our Echo devices as baby monitors and would like these to start working again. Thank You
-
I have had the same problem for weeks. However, with a slight deviation.
I have 2 Echo Show 8 1st generation. On these, the playback of the cameras (different types) works without any action. But there are also days when nothing works. And then it’s fine again a day later.
I also have an Echo Show 15, on which the camera playback has not worked for weeks.
It doesn’t seem to be the same problem as in October 2023 (expired certificate). Otherwise it wouldn’t work on any device and it wouldn’t work all the time. Is Amazon involved with “new features” again?
It would be great if there will be a solution to the problem. I would also be prepared to pay a monthly/annual fee for a better service, e.g. like for “MyMedia”.
-
In my opinion is Monoclecam dead, because Roberts last Login was 23.October 2024 ! What a pitty