Echo Show 5 with Unifi Protect [SOLVED]

g7pfv

@Monocle Thank you Robert - sterling service response for a free beta platform (far better than many paid services )

Monocle

There is another thread here in the forums talking about an Amcrest NVR that can output a single stream with a matrix view of cameras. I have one on order to test it out for myself. Of course native support by Alexa for a multiple camera view would be better, but until then …

Thanks, Robert

Monocle

@g7pfv

OK, here is a test feed to try with your Echo Show 5.

This first test does not require any tags.

Here is the RTSP URL:
rtsp://demo.mproxy.io:443/resort

Here it is configured in my camera settings in the Monocle Web Portal:

I have tested this on the new Echo Show 5 and it seem to be working fine from here.

Thanks, Robert

g7pfv

@Monocle said in Echo Show 5 with Unifi Protect:

rtsp://demo.mproxy.io:443/resort

Setup as your config - Alexa just responds with some blurm about knowing 500 demos, do I need to do anything in the gateway config etc ?

I can’t open this feed with VLC - its as if it does not exist. and can’t ping it.

Ignore me - works fine once I have discovered the new device in Alexa !!!

Monocle

@g7pfv

OK, so the test feed is working ok?
If so, then this validates the same SSL certificate chain that your gateway instance is using.

The next test step is for me to setup a demo feed that we will route though your gateway and see what happens.
I’ll probably get this setup tomorrow.

PS, VLC won’t view this stream because its encrypted. Ping may not work as IGMP may be blocked on this server.

Thanks, Robert

g7pfv

@Monocle Yes test feed works well - Much appreciated, was just me being an idiot - look forward to continued testing and perhaps a resolution (fingers crossed) - thanks for the time given to this so far.

Monocle

@g7pfv

OK, the next test will involve running the same demo feed thru your instance of Monocle Gateway. However, I had to fix a couple of minor issues to get it working.

So, first. You will need to replace your “monocle-gateway.exe” file with a newly compiled one from this link:
https://www.dropbox.com/sh/m91e8z2wa1s89d7/AACRqcwLvdTFA-5gsBo9ItrKa?dl=0&lst=

(The new version should be “0.0.4-1” instead of “0.0.4”)

Now, we will need to update the demo RTSP URL to use port 554 instead of 443. Port 443 is already encrypted whereas port 554 is the raw unencrypted feed.

rtsp://demo.mproxy.io:554/resort

You will also need to add the @tunnel tag to the camera config as shown below:

Thanks, Robert

g7pfv

@Monocle I get the camera is not responding, text from gateway below:-

C:\montest>monocle-gateway

 ******************************************************************
 *             __  __  ___  _  _  ___   ___ _    ___              *
 *            |  \/  |/ _ \| \| |/ _ \ / __| |  | __|             *
 *            | |\/| | (_) | .` | (_) | (__| |__| _|              *
 *            |_|  |_|\___/|_|\_|\___/ \___|____|___|             *
 *                                                                *
 ******************************************************************


-------------------------------------------------
MONOCLE RUNTIME ENVIRONMENT
-------------------------------------------------
VERSION   = 0.0.4-1
OS/ARCH   = win32\x64
PROCESS   = monocle-gateway (PID=30276)
TIMESTAMP = 2019-07-25T17:54:45.543Z

-------------------------------------------------
MONOCLE GATEWAY SERVICE         (Version: 0.0.4-1)
-------------------------------------------------
[Monocle Starting]
[Monocle Connecting]
[Monocle Started]
[RTSP Server Starting]
[RTSP Server Listening] 0.0.0.0:8555 (RTSP)
[RTSP Server Listening] 0.0.0.0:443 (RTSP-TLS)
[RTSP Proxy Started] (PID=14896)
[RTSP Server Listening] 0.0.0.0:8554 (PROXY)
[RTSP Server Started]
[Monocle Connected]
[RTSP Server Registered]

-------------------------------------------------
MONOCLE RTSP SERVICE - INITIALIZED
-------------------------------------------------
FQDN = 440e1290-b99b-4e3d-ad59-139d53424742.mproxy.io
HOST = 192.168.98.1
PORT = 443
-------------------------------------------------

-------------------------------------------------
INITIALIZE RTSP STREAM:  Demo
-------------------------------------------------
 - NAME  : Demo
 - LABEL : PRIMARY
 - URL   : rtsp://demo.mproxy.io:554/resort
 - UUID  : STREAM:46292276-3aa7-41df-989b-56f943da7031
 - SESS  : 5377b0b2-52e2-44a5-b93c-a790caeaf6a4
 - MODIF : Thu Jul 25 2019 18:52:26 GMT+0100 (British Summer Time)
 - TAGS  : @tunnel
-------------------------------------------------

Monocle

@g7pfv

OK, so we have come full circle back to the original issue. The Alexa device is not attempting to connect to your gateway. This could be for any number of reasons but the most common are FIREWALL blocking access to port 443. DNS REBINDING preventing DNS resolution of host address 440e1290-b99b-4e3d-ad59-139d53424742.mproxy.io inside your local network, the Alexa devices and Monocle Gateway on separate networks preventing access to each other (such as a guest network or pretected VLAN) or some other network security appliance/device blocking access. I know you have tested these before, but something is blocking Alexa’s access to the Monocle Gateway.

When you do the ping test/openssl test are you doing that from the same computer where you are running Monocle Gateway or from another computer? Is same, then try from another computer on the network.

Just to verify, is IP address 192.168.98.1 the correct IP for this computer running Monocle Gateway and the IP address that the Alexa device should be able to reach?

I’ll work on setting up a Monocle Gateway instance for us to test with in the cloud.

Thanks, Robert

g7pfv

@Monocle Thanks Robert, I have tried turning off firewall and security software to no avail - yes the ping/ssl are from same computer running the gateway - I did all the DNS rebinding tests with success.

I also run a Unifi security gateway so wonder if its this or something in my network config in the Unifi controller ?

I have no separate VLAN’s or guest networks

192.168.98.1 is a VMware adaptor

PC is currently 192.168.0.185, everything on network is 192.168.0.xxx

Windows IP Configuration

Ethernet adapter Ethernet: