Request for log sample in troubleshooting guide
-
Hi folks,
while working on the AVM Fritzbox issue I ran lack of some information to do a better troubleshooting. So I would ask you to add some more lines to the troubleshooting guide or to the context of DNS rebind troubleshooting…
There were some lines (I think four) writing [REQUEST] in ‘monocle-gateway --tail’ every time I did a request via Echo with IPv4 Google DNS. So I conclused the Echo found the right IP and talks to the gateway but it was wrong.
Please add some logs of ‘monocle-gateway --tail’. One log to show a working request and one log to show network-issue. I found the bad log in the post https://forum.monoclecam.com/topic/207/camera-not-responding-resolved-see-post-below. You wrote there that Alexa don’t connect. That was the final hint for me to know there is a problem with networking.
Second it may be useful for users to find command lines for ‘nslookup’ and ‘dig’ in the troubleshooting guide. For example on windows press Start, type cmd <Return>. The command-prompt opens. Then type ‘nslookup <monocle-host> 8.8.8.8’ to use Google-DNS and ‘nslookup <monocle-host>’ to use default DNS-Server for comparison. It should give the IP of the monocle-gateway. Unfortunaly asking IPv6 DNS-Server is more complicated. But maybe you can give at least a hint to this tools in the guide.
I’m not using Alexa at all for myself but had to support a neighbour. So I found your service and gateway an I want to say: You’re donig very nice work :v:
Regards, Andre.