Amazon Echo Show 10 inch
-
@jshimota said in Amazon Echo Show 10 inch:
Alexa’s don’t like H265 for some reason.
As far as I know Alexa does not support
H265video codec.
Supported video codecs
You can use the following supported video codec values: H264, MPEG2, MJPEG, JPG. -
@jshimota said in Amazon Echo Show 10 inch:
I’m guessing there has been a rewrite to the security component to the dialog between camera source and Amazon and when you are bypassing a 3rd party app as I am you aren’t talking SSL and therefore get dropped.
I am going to re-implement the gateway - and also to on @fakefmtp as the Monocle master was kind enough to explain that and I suspect it too is now required to create a supportable stream.Well … Amazon still claims to support local camera connections here:
https://developer.amazon.com/en-US/docs/alexa/device-apis/alexa-camerastreamcontroller.html#supported-videoLocal and remote execution recommendations
You can return a local URI on the same network as your device, or you can return a remote URI accessible from anywhere with an Internet connection. You should return a URI that makes the most sense for your device cloud configuration. Whether you return a local or remote URI, you must meet all requirements including the use of TLS 1.2.
In general, a URI isn’t reachable both locally and remotely by default. You can make the URI accessible locally and remotely through domain purchasing or port forwarding. These solutions are technically challenging, so provide this solution only if your customers need both local and remote URI access.So in theory it should work.
Where did you get the debug log info … Amazon has never provided a way for me to get access to that before. As far as I know the Echo Show gen 2 and FireTV 4K devices all became more strict about the SSL implementation and that is why Monocle Gateway was created. Monocle Gateway will provide a valid SSL certificate to Alexa when requesting a camera stream based on a unique and valid DNS hostname. But it’s being reported that even with Monocle Gateway, the new Echo Show 10" 3rd Gen is not working.
I guess if possible use Monocle Gateway and see if Amazon can provide an updated error log and lets see if it’s getting past the SSL error. (Which it should!)
Thanks, Robert
-
@jshimota - i’m bailing on this project. I packaged my two gen 3’s up and an sending them back to Amazon. I think I’ll get another Gen two and just stick with that for now. Good luck with this and I hope it works out for you.
-
@Monocle Hi Robert!
I know you’re busy leading the pack here and I appreciate all you do and have done.Regarding how I got Amazon to send logs - As I described elsewhere, I went through the horrible process of convincing the tier 1 support person this was their problem. they escalated me to a Tier 2 guy. He made me follow a script - ie; did you turn it off and on? did you reset it? blah. blah then as I described it working on a Show 10" gen 2, but not the Gen 3, he accepted that this was an amazon induced problem and made a trouble ticket. I had to wait 2 days (he went away for the weekend) but when he came back the ticket had a response from his Tier 3 people. He began reading that response and I realized he had /was looking at a clip from their logs. I asked him to mail it, and he did.
I’m ending my effort on this today - although it may take a few days to get it boxed and back to UPS for return (wink). Like 2 other users, it’s really amazon who’s moved the goal post. Monocle has done great work getting so many devices to work - and then for them to break it… again… is just a royal pain!
I tried:
Direct to device
Through the BlueIris
Through the device with the monocle-gateway
through the BI with the Gateway - and all of this with the params below (about 30 test combinations).
@proxy
@procy-tcp
@tunnel (with various @noaudio, @fakefmtp combo’s.)If it worked on my Show 10 Gen 2, then I went and tried it on the Gen 3. In no cases did I ever get even a peep from the Gen 3. I reviewed the BlueIris - checking for SW versions, cam configs etc. All is as it seems it should be. In the end, I put everything back as it was before, I go direct to my big cams and through BI for my office and doorbell (only way I know how to get my doorbell is to run it via the BlueIris).
I didn’t save any logs which I suspect you may want. I’m willing to try anything you’d like me too - and will even let you remote me if you want to sniff my environment. But this isn’t really on you - it’s amazon tightening screws to tight IMHO. -
@Dalecway I am following you Dalecway. Although it may take a day or two to get packaged and shipped - and I’ve offered Robert the chance to touch this device if he’d like before I dispose of it!
-
I have ordered a gen 3 10” and it should be here early next week. However I don’t expect to find a magical cure but just thought I would give it a try.
Thanks, Robert
Monocle: https://monoclecam.com
Getting Started | Troubleshooting Guide | FAQ | Contact Support -
My Echo Show 10 Gen 3 came in and it immediately worked with my 4K PTZ Amcrest cameras (using Monocle Gateway of course and the
@tunneltag). It did perform an update on first boot and its now running FireOS 7.5.4.2 (PS7542/1940).If you want to share an RTSP stream with me (private message) I can test it on your stream to see what happens.
Thanks, Robert
-
Hey Robert. glad you’ve got a unit now. I had to return mine or I would have been stuck with it - I’ve already replaced it with a 10" gen 2 and I’ve been running fine throughout my environment.
-
@Monocle Good to hear that it works now. My gen 3 also updated as soon as I turned it on but apparently it was an older os than what you are using. I was at the end of my 30 days with Amazon so I returned both of my GEN 3’s. I got another GEN 2 10 inch and I’m very happy now. All of my cameras work fine on the gen 2. Thanks for everything you do.
Dale Conway -
I may end up returning this one as well.
The panning trick is somewhat of a gimmick and I’m not sure it’s worth the hefty price. -
@Monocle Robert…you are a superstar…everything is all working again just as you said it was…apols for letting you know so late but Ive only just had a chance to look into this again as assumed it was still dead…
Hope all is well for you and again thanks for your continued efforts
-
I know I’m late for the party but just last night I installed the Monocle Gateway and my HikVision stream(s) worked (with a delay of about 12sec.) on Echo Spot straight away.
I’m not about order the Echo Show 10 G3 and just wanted to ask: Is it working with Monocle as expected with updated firmware/OS? I won’t be going through ordering and returning if it still doesn’t.-San
-
As far as I know I’m the only reported working success story on the Echo Show 10 Gen 3.
I never experienced it not working so it’s hard to say if its a camera compatibility issue or if some Amazon firmware/system update occurred that fixed the original issue.So at this point, all I can suggest is that you try and it see … with the caveat that you may end up having to return it if it does not work for you.
Thanks, Robert
