Unifi Camera Update! (Fix Available for Testing Now)
-
Sorry I had created a post that had all that information in it but it kept getting flagged as spam for some reason. This is my initial setup. I just got the Alexa for my wife for Christmas.
I am using an alexa show 8.
I have tried both 0.0.4 gateway as well as 0.0.6 (I am on 0.0.6) at this point.
Cameras are ubiquiti g4 pro.’Thanks for the help!
-
@SchmuFoo Thanks for the reply. I am up and running again.
-
@4th8 I don’t have any g4 cameras myself however some users have reported it not working with certain resolutions, however switching on the 1080p resolution as reported below and then using that stream appeared to great round the is issue. Are you able to try?
@HomeTechDad said in Unifi Camera Update! (Fix Available for Testing Now):
@RS Thanks for the suggestion! G4 typically only outputs 3 stream presets 640p, 720p, and 4k. However, I found this link with instructions to enable a 1080p output: https://community.ui.com/questions/UVC-G4-PRO-is-able-to-produce-1080p/a30a8dc4-80c7-4e17-bc5a-6d0c07467689#answer/87194840-96e2-4013-a83f-960f19576f05
This finally fixed my issue!! Thank you so much @RS!!
-
@4th8 Also you do need to be on version 0.0.6 for ubiquity cameras as their latest update changed the format of some of the video streams
-
@RS Your awesome! That seems to have worked. At least without audio.
Now i just need to figure out if i can get audio to work
-
For the next person trying to do this…
To get a Unifi G4 Pro camera to work.
- Use the tags @fixaudio and @tunnel.
- Set the audio codec to G711
- Set the video quality to 1080p
- Within the camera itself turn on high frame rate mode
Camera > recording > recording quality > toggle high frame rate mode.
Just got it working! Thanks everyone for the help!
-
That’s good news, I have mine without audio as it’s in Optus living room and the constant car/wind/people noise is annoying :)
But I do believe that audio does work, when creating the camera in the monocle portal, in the tags settings have you got “@tunnel @fixaudio” entered?
-
HaHa you beat me to it! Glad all is working
-
Only real downside I have found is that by turning on high framerate it disables 4k recording. If anyone has a way around that it would be great.
-
@bk I could still use the hacked version. Would it still be possible to get a copy?
Thanks!
-
@rstraniero
I should (I don’t throw anything out-still got emails from the 90’s), but it’s not mine to give out to be honest.
@Monocle Rob has/had it… so you could message him and ask. Or if he give me permission, I could make available. But again, it’s not mine to share / distribute.Frankly , it’s very easy to get a Pi up and running. I know they are sort of hard to get, but they are out there for reasonable monies in all you need to get going kit form for ~$165 Pi48m. (seems they wont sell them as just boards lately)
And Rob has a very good step by step. I recommend you take the plunge… This is a gateway on your network , so best to keep security on the forefront. The “hacked” Win7 version, has no promises of being up to date security wise due to the hacking Rob did to get a running version, hence dropping the Win7 support. He more or less did it as a proof of concept of where the issues where and are. -
@rstraniero
Please understand, I’m respecting @Monocle Rob I.P. -
@bk Thanks for the reply…I’ll take a look at the PI solution…take care, Roberto
-
I have no problem with the “hacked” Windows 7 version being made available.
In fact, here is the public link to it:
https://archive.monoclecam.com/monocle-gateway/monocle-gateway-0.0.6-beta/windows/monocle-gateway-windows-x64-v0.0.6-WIN7-HACK.zipPlease just be aware that there is no official support for Windows 7 as of v0.0.6 nor going forward. If I recall it had something to do with underlying support discontinued in the dependency framework.
Thanks, Robert
-
As @bk suggested there are elecellent alternatives such as running on a Raspberry Pi. You can also alternatively run it in a virtual machine or as a Docker container — albeit a Raspberry Pi (or similar SBC) may be the easiest if you are not familiar with VMs or Docker. The only requirement is that it must expose port 443 on your private network. (Not publicly to the Internet!).
I have personally run it on the following platforms over the years:
- Raspberry Pi
- MacOS
- Ubuntu Virtual Machine on VMWare ESXi
- Ubuntu Virtual Machine on Proxmox
- Synology NAS Docker Container
- QNAP NAS - using Docker Container (via Container Station)
- QNAP NAS - using Ubuntu Virtual Machine (via Virtualization Station)
I have previously run it on Windows for testing, but never really long term.
-
are the beta-6 version deb or tar built for compatibility with ARM6? I’m seeing “Illegal instruction” and nothing else when trying this out on an old rpi model Bv2.
-
nevermind me:
pi@pie:~/monocle $ readelf -A $(which monocle-gateway) Attribute Section: aeabi File Attributes Tag_CPU_name: "7VE" Tag_CPU_arch: v7 Tag_CPU_arch_profile: Application Tag_ARM_ISA_use: Yes Tag_THUMB_ISA_use: Thumb-2 Tag_FP_arch: VFPv4 -
Seems to have fixed my issues. Is this still in beta coming up on year now?
